CANTILEVER SLIDING GATE 15M

SPECIFICATION
Frame: RHS 80x80, 100x80, 120x100 , 120x120, 140x140
depending on the height and clearance
Infill: vertical section 25x25, 30x20, 30x30, round tube fi
22m, weld mesh panels 8/6/6, weld mesh 358, steel sheet,
trapezoid sheet
Gate posts: square or rectangular steel profiles according
to the structural design requirements with universal
assembly flange for direct fence connection and control
equipment.RHS sections examples: 100x100, 120x120,
140x140, 160x160, 200x200, 400x200 depending on the
height and clearance
Clearance  up to 15m in standard construction
Height: up to 5000mm in standard
Bottom rail: German precise Welser Profile 192x155mm
(or special reinforced) depending on the clearance
Construction type: single wing, double wing, crash-°©‐rated
Surface protection: hot dip galvanized and powder coated
to each RAL colour
*Long-°©‐term anti-°©‐corrosion protection
*Manual or automatic operated. In manual version all
accessories made of INOX (handles, locks)

SPECIAL CANTILEVER GATE UP TO 32M

SPECIFICATION
Gate in special construction up to 32 meter clearance,
with special post and side construction.
Infill: vertical section 25x25, 30x20, 30x30, round tube fi
22m, weld mesh panels 8/6/6, weld mesh 358, steel she-°©‐
et, trapezoid sheet
Gate posts: square or rectangular steel profiles according
to the structural design requirements with universal
assembly flange for direct fence connection and control
equipment.
Clearance -°©‐ up to 32m in special construction with
double side support
Height: up to 2500 mm in standard
Bottom rail: German precise Welser Profile 192x155mm
with special reinforced made of steel grating
Construction type: single wing, double wing
Surface protection: hot dip galvanized and powder
coated to each RAL colour
*Longterm anti corrosion protection
*Manual or automatic operated.
K12 CRASH RATED

Crash Rated Gates are built to withstand an impact of K4, K8 and K12 level standards. In the highest security level, the gate is
manufactured to withstand a 7,5 tone lorry driving 80km/h. Gates are a result of  research of our construction department. Crash
Rated Sliding Gates have a special construction, which is able to absorb the force of impact. The materials used to produce the
gate, are of highest quality and tensile strength, precisely welded together. Gates can be adapted for manual operations with
locking system or for automatic operations. In automatic version, gates are equipped with a fast operating and robust SIEMENS drive
and Mitsubishi inverter with PLC. Available in a variety of forms, in standard from 2 up to 7 metre clearance.

SPECIFICATION:
Type: Sliding Tracked Gate, on a single or double ground rail type S10 or S20,
Gates Height: up to 3.0 m above the road level (depending on the security level required)
Gates Clearance: up to 7.0 m clearance
Construction Materials: Construction material used, depends on the security level and ornamental
match required by customer
Higher grades of rectangular and square steel profiles15 mm wall thickness (depending on the size )
Various cross-°©‐sections of HEA, HEB double tee beams
Impact Absorption Device
Infill Types: fully welded steel sheet, RHS rectangular bars various cross sections, high tensile weld mesh
Use intensity: designed for very intensive use
Control unit and drive: robust worm 3-°©‐phase gear motor (with tooth rack system or chain system), drive closed in steel cabinet, painted to a chosen color
of RAL palette
Protection grade: IP55
Power supply : 230/400V, 50/60hz in standard
Opening speed: approx. 0,5m/sec in standard mode ( in special mode higher speed 1000mm/sec available)
Locking mechanism: the drive is blocking the gate mechanically